Agitated Thin Film Evaporator

Fruit Plants

Thin film or wiped film evaporators are used to separate a mixture of liquids having different boiling points. It is also used to increase the concentration of liquids.



Principle of Operation
The liquid feed is distributed on the heated wall of the evaporator to form a uniform thin film with the help of suitable configuration of blades. The volatile component or the component with lower boiling point gets evaporated and is vacuumed out of the evaporator, while the component with higher boiling point flows down the wall and is collected at the bottom. The vapours are passed through a condenser and collected separately.

Operating Features
The heat transfer in thin film evaporator is very quick and efficient, thus demanding lower surface area and heat input as compared to other types of evaporator. Due to high vacuum distillation and very short residence time the thin film evaporator are suitable for handling wide range of heat sensitive, high boiling and viscous feeds. Due to low rotor speeds in the range of 100 to 150rpm, the horse power requirements are very low. To reduce the pressure drop between the evaporator and condenser, the internal condensers can be provided to achieve short path distillation. The thin film evaporators are designed to handle various products with operating pressures up to O.1torr. Liquids with viscosities above 2,00,000cps can be handeled in these evaporators.

Construction of ATFE
The Agitated Thin Film Evaporator consists of a jacketed shell having a machined surface on the inner side. The rotor assembly consisting of different configuration of blades depending upon the nature of product is mounted in the shell. Feed inlet is provided at the top side. Specially designed feed distributor is integral with the rotor at the top side. The rotor is also fitted with an entrainment separator. Generally the vapour outlet is provided on the top side of the shell. The different types of blade configurations available are:

  • Fixed blade rotor
  • Spring loaded rotor
  • Cylindrical wiper rotor
  • Centrifugal blade rotor

The construction of the evaporator is such that different types of rotors can be mounted in the same equipment for different products. The evaporators having surface area up to 50sq.m. can be supplied.



RAJ Agitated Thin Film Evaporator Models

Model
Surface
area (m2)
Diameter
(mm.) (D)
Total height
(mm) (H)
Motor
hp.
RE-5
0.5
250
2250
2
RE-10
1
350
2650
3
RE-30
3
450
3500
5
RE-50
5
600
4750
7.5
RE-75
7.5
700
5750
10
RE-100
10
800
6500
15
RE-150
15
950
7500
20
RE-200
20
1100
8000
25
RE-250
25
1350
8500
30
RE-350
35
1600
9500
40
RE-500
50
2000
11000
60

Features

  • Fully automatic system to ensure smooth and easy operation.
  • Sterile construction of equipment to maintain high hygiene level.
  • Energy Efficient.
  • Optimal space requirement.
  • Carefully selected material of constructions taking into account the product properties.
  • Complete sanitary design with CIP system.
  • PLC controlled SCADA operated system.

Services

  • Turnkey Plants.
  • Manufacturing & Supply of Equipments.
  • Engineering and Supervision of Civil and Structural work.
  • Process and Detailed Engineering.
  • Project Management.
  • Commissioning and Training.